poly c0 c1 c2 c3 ... poly c0 c1 c2 c3 ... args
Defines a transfer function by a one dimensional polynomial.
For capacitors, this function defines charge as a function of voltage. For inductors, it defines flux as a function of current. If you have the coefficients defining capacitance or inductance, prepending a “0” to the list will turn it into the correct form for Gnucap.
For fixed sources, it defines voltage or current as a polynomial function of time.
The transfer function is defined by:
out = c0 + (c1*in) + (c2*in^2) + ....
| min | Minimum output value (clipping). (Default = -infinity) |
| max | Maximum output value (clipping). (Default = infinity) |
| abs | Absolute value, truth value. (Default = false). If set to true, the result will be always positive. |
This function does not directly participate in time step control, except as the device would otherwise.